PORSCHE 996 CARRERA WING
Can't find what you need? Try browsing the Accessories or Exploded Diagrams!Filtered by: 911 1998-05 (includes uncategorized and accessory items)
This harness mount was developed in response to customer requests for a truss-style harness mount for the Porsche 996 coupe. The new 846 r1035 features water-jet machined aluminum construction much like our 846 r1025 harness truss. Like all brey-krause harness mounts, the 846 r1035 uses only existing mounting points. No drilling, welding or fabrication is required for installation. Once installed, the main portion can be unbolted in ten minutes, allowing use of the rear seats.
The 846 r1035 been tested and certified by an independent lab to handle the types of forces required by the national highway traffic safety admin. Dot and sae j385 rev.mar 95, motor vehicle seat belt anchorages-performance requirements...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11 911 TURBO/GT2 2007-09 911 2005-08 911 GT3 2003-05 911 TURBO/GT2 2001-05 911 1998-05
$1,638.45
Make a selection
Product details: dramatically improve mid/high end power by replacing the catalytic converters with a free-flowing x-pipe while adding aggressive sports car sound and throttle response; recommended for track and off-road use only.
Note: the cat bypass x-pipe provides dramatic power increases in the mid to high end of the rpm range. street drivers may notice a small torque loss at low rpm, which is why we recommend the sportcat x-pipe for street applications. please also bear in mind that this system does not include catalytic converters, so the check engine light (cel) will most likely be triggered. This is not an indication of any actual issue with the engine, and does n...(choose a part on the right to read more)
General Fitment 911 GT3 2003-05 911 1998-05
From $1,295.00
Make a selection
This harness mount was developed in response to customer requests for a truss-style harness mount for the Porsche 996 coupe. The new 846 r1035 features water-jet machined aluminum construction much like our 846 r1025 harness truss. Like all brey-krause harness mounts, the 846 r1035 uses only existing mounting points. No drilling, welding or fabrication is required for installation. Once installed, the main portion can be unbolted in ten minutes, allowing use of the rear seats.
Wrap around installation of the belts.
The 846 r1035 been tested and certified by an independent lab to handle the types of forces required by the national highway traffic safety admin. Dot and sae j385 rev.mar 95, motor vehicle seat ...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11 911 TURBO/GT2 2007-09 911 2005-08 911 GT3 2003-05 911 TURBO/GT2 2001-05 911 1998-05
$1,017.60
Make a selection
Stoptech big brake kit rear slotted black caliper Porsche 996 Carrera 2004
first, larger rotors increase heat capacity, allowing a driver to brake harder stop-after-stop with reduced chance of fade. Second, stiffer calipers and stainless steel lines reduce system compliance, providing consistent pedal feel .the key, however, is to increase heat capacity and reduce compliance without upsetting a vehicle's stock front-to-rear brake torque ratio. That is why stoptech developed the balanced brake upgrade design philosophy, which precisely apportions front and rear braking resources while factoring in vehicle weight transfer under braking.every stoptech balanced big brake kit is engineered to produce that op...(choose a part on the right to read more)
General Fitment 911 1998-05 911 TURBO/GT2 2001-05 911 GT3 2003-05
$2,694.60
Make a selection
Stoptech big brake kit rear drilled black caliper Porsche 996 Carrera 2004
first, larger rotors increase heat capacity, allowing a driver to brake harder stop-after-stop with reduced chance of fade. Second, stiffer calipers and stainless steel lines reduce system compliance, providing consistent pedal feel .the key, however, is to increase heat capacity and reduce compliance without upsetting a vehicle's stock front-to-rear brake torque ratio. That is why stoptech developed the balanced brake upgrade design philosophy, which precisely apportions front and rear braking resources while factoring in vehicle weight transfer under braking.every stoptech balanced big brake kit is engineered to produce that op...(choose a part on the right to read more)
General Fitment 911 1998-05 911 TURBO/GT2 2001-05 911 GT3 2003-05
$2,694.60
Make a selection
Stoptech big brake kit rear drilled silver caliper Porsche 996 Carrera 2004
first, larger rotors increase heat capacity, allowing a driver to brake harder stop-after-stop with reduced chance of fade. Second, stiffer calipers and stainless steel lines reduce system compliance, providing consistent pedal feel .the key, however, is to increase heat capacity and reduce compliance without upsetting a vehicle's stock front-to-rear brake torque ratio. That is why stoptech developed the balanced brake upgrade design philosophy, which precisely apportions front and rear braking resources while factoring in vehicle weight transfer under braking.every stoptech balanced big brake kit is engineered to produce that o...(choose a part on the right to read more)
General Fitment 911 1998-05 911 TURBO/GT2 2001-05 911 GT3 2003-05
$2,694.60
Make a selection
Stoptech big brake kit front slotted black caliper Porsche 996 Carrera 2004
first, larger rotors increase heat capacity, allowing a driver to brake harder stop-after-stop with reduced chance of fade. Second, stiffer calipers and stainless steel lines reduce system compliance, providing consistent pedal feel .the key, however, is to increase heat capacity and reduce compliance without upsetting a vehicle's stock front-to-rear brake torque ratio. That is why stoptech developed the balanced brake upgrade design philosophy, which precisely apportions front and rear braking resources while factoring in vehicle weight transfer under braking.every stoptech balanced big brake kit is engineered to produce that o...(choose a part on the right to read more)
General Fitment 911 1998-05 911 TURBO/GT2 2001-05 911 GT3 2003-05
$3,126.60
Make a selection
Stoptech big brake kit rear drilled red caliper Porsche 996 Carrera 2004
first, larger rotors increase heat capacity, allowing a driver to brake harder stop-after-stop with reduced chance of fade. Second, stiffer calipers and stainless steel lines reduce system compliance, providing consistent pedal feel .the key, however, is to increase heat capacity and reduce compliance without upsetting a vehicle's stock front-to-rear brake torque ratio. That is why stoptech developed the balanced brake upgrade design philosophy, which precisely apportions front and rear braking resources while factoring in vehicle weight transfer under braking.every stoptech balanced big brake kit is engineered to produce that opti...(choose a part on the right to read more)
General Fitment 911 1998-05 911 TURBO/GT2 2001-05 911 GT3 2003-05
$2,694.60
Make a selection
Stoptech big brake kit front drilled black caliper Porsche 996 Carrera 2004
first, larger rotors increase heat capacity, allowing a driver to brake harder stop-after-stop with reduced chance of fade. Second, stiffer calipers and stainless steel lines reduce system compliance, providing consistent pedal feel .the key, however, is to increase heat capacity and reduce compliance without upsetting a vehicle's stock front-to-rear brake torque ratio. That is why stoptech developed the balanced brake upgrade design philosophy, which precisely apportions front and rear braking resources while factoring in vehicle weight transfer under braking.every stoptech balanced big brake kit is engineered to produce that o...(choose a part on the right to read more)
General Fitment 911 1998-05 911 TURBO/GT2 2001-05 911 GT3 2003-05
$3,126.60
Make a selection
Stoptech big brake kit rear slotted red caliper Porsche 996 Carrera 2004
first, larger rotors increase heat capacity, allowing a driver to brake harder stop-after-stop with reduced chance of fade. Second, stiffer calipers and stainless steel lines reduce system compliance, providing consistent pedal feel .the key, however, is to increase heat capacity and reduce compliance without upsetting a vehicle's stock front-to-rear brake torque ratio. That is why stoptech developed the balanced brake upgrade design philosophy, which precisely apportions front and rear braking resources while factoring in vehicle weight transfer under braking.every stoptech balanced big brake kit is engineered to produce that opti...(choose a part on the right to read more)
General Fitment 911 1998-05 911 TURBO/GT2 2001-05 911 GT3 2003-05
$2,694.60
Make a selection
Each gruppem aerodynamic component is hand made from the highest grade carbon fiber and kevlar composites. Aerodynamic elements can not only be visually appealing but also improve performance. With more downforce the tires will have more grip through the corners, as well as under braking. Additionally, our components are lighter than their stock counterparts, so overall power-to-weight ratio is improved as well.
Gruppem has poured an enormous amount of research data, testing, and air flow management experience into developing an aero component product line with absolutely no compromise. Every gruppem aerodynamic component is designed to match the make and model for each application, maximizing downforce, ...(choose a part on the right to read more)
General Fitment 911 1998-05
$5,408.24
Make a selection
Stoptech big brake kit front slotted red caliper Porsche 996 Carrera 2004
first, larger rotors increase heat capacity, allowing a driver to brake harder stop-after-stop with reduced chance of fade. Second, stiffer calipers and stainless steel lines reduce system compliance, providing consistent pedal feel .the key, however, is to increase heat capacity and reduce compliance without upsetting a vehicle's stock front-to-rear brake torque ratio. That is why stoptech developed the balanced brake upgrade design philosophy, which precisely apportions front and rear braking resources while factoring in vehicle weight transfer under braking.every stoptech balanced big brake kit is engineered to produce that opt...(choose a part on the right to read more)
General Fitment 911 1998-05 911 TURBO/GT2 2001-05 911 GT3 2003-05
$3,126.60
Make a selection
Stoptech big brake kit front drilled red caliper Porsche 996 Carrera 2004
first, larger rotors increase heat capacity, allowing a driver to brake harder stop-after-stop with reduced chance of fade. Second, stiffer calipers and stainless steel lines reduce system compliance, providing consistent pedal feel .the key, however, is to increase heat capacity and reduce compliance without upsetting a vehicle's stock front-to-rear brake torque ratio. That is why stoptech developed the balanced brake upgrade design philosophy, which precisely apportions front and rear braking resources while factoring in vehicle weight transfer under braking.every stoptech balanced big brake kit is engineered to produce that opt...(choose a part on the right to read more)
General Fitment 911 1998-05 911 TURBO/GT2 2001-05 911 GT3 2003-05
$3,126.60
Make a selection
Product details:
Loud and aggressive performance exhaust system recommended for track use only; replaces the restrictive factory mufflers with a free-flowing resonated design.
Features:
-fits all Porsche 996 Carrera vehicles 1998-2005
-increases horsepower and torque by 8 whp and 16 ft-lbs
-saves 21 lbs from the rear of the vehicle
-dramatically reduces backpressure and improves exhaust flow and sports car sound
-includes fabspeed's deluxe quad-style tips available in polished or black chrome. Please indicate your year when ordering.
-direct replacement for the factory mufflers; compatible with the factory OEM cats or fabspeed’s sportcat or cat bypass ...(choose a part on the right to read more)
General Fitment 911 1998-05
$1,895.00
Make a selection
Stoptech big brake kit front slotted black caliper Porsche 996 Carrera 4 2004
first, larger rotors increase heat capacity, allowing a driver to brake harder stop-after-stop with reduced chance of fade. Second, stiffer calipers and stainless steel lines reduce system compliance, providing consistent pedal feel .the key, however, is to increase heat capacity and reduce compliance without upsetting a vehicle's stock front-to-rear brake torque ratio. That is why stoptech developed the balanced brake upgrade design philosophy, which precisely apportions front and rear braking resources while factoring in vehicle weight transfer under braking.every stoptech balanced big brake kit is engineered to produce that...(choose a part on the right to read more)
General Fitment 911 1998-05 911 2005-08
$3,126.60
Make a selection
Stoptech big brake kit front slotted red caliper Porsche 996 Carrera 4s 2004
first, larger rotors increase heat capacity, allowing a driver to brake harder stop-after-stop with reduced chance of fade. Second, stiffer calipers and stainless steel lines reduce system compliance, providing consistent pedal feel .the key, however, is to increase heat capacity and reduce compliance without upsetting a vehicle's stock front-to-rear brake torque ratio. That is why stoptech developed the balanced brake upgrade design philosophy, which precisely apportions front and rear braking resources while factoring in vehicle weight transfer under braking.every stoptech balanced big brake kit is engineered to produce that ...(choose a part on the right to read more)
General Fitment 911 1998-05 911 2005-08
$3,126.60
Make a selection
Gruppe m ram air intake system Porsche 996 Carrera incl. 4s 98-00
The gruppem ram air intake system was created to improve efficiency by reducing the restrictions of a stock intake. A factory intake system is designed to minimize cost and reduce noise within the cabin, but these tradeoffs also sacrifice performance. To increase efficiency and power, gruppem has worked to reduce restriction and decrease the intake air temperature. Colder air is denser allowing the intake system to move a larger volume of air and in turn make more power. The shape of the duct and filter are designed specifically to increase the velocity of the air and increase the pressure, while at the same time fitting within engine bays...(choose a part on the right to read more)
General Fitment 911 1998-05
$3,365.42
Make a selection
Each gruppem aerodynamic component is hand made from the highest grade carbon fiber and kevlar composites. Aerodynamic elements can not only be visually appealing but also improve performance. With more downforce the tires will have more grip through the corners, as well as under braking. Additionally, our components are lighter than their stock counterparts, so overall power-to-weight ratio is improved as well.
Gruppem has poured an enormous amount of research data, testing, and air flow management experience into developing an aero component product line with absolutely no compromise. Every gruppem aerodynamic component is designed to match the make and model for each application, maximizing downforce, ...(choose a part on the right to read more)
General Fitment 911 1998-05
$5,021.93
Make a selection
Stoptech big brake kit front drilled silver caliper Porsche 996 Carrera 2004
first, larger rotors increase heat capacity, allowing a driver to brake harder stop-after-stop with reduced chance of fade. Second, stiffer calipers and stainless steel lines reduce system compliance, providing consistent pedal feel .the key, however, is to increase heat capacity and reduce compliance without upsetting a vehicle's stock front-to-rear brake torque ratio. That is why stoptech developed the balanced brake upgrade design philosophy, which precisely apportions front and rear braking resources while factoring in vehicle weight transfer under braking.every stoptech balanced big brake kit is engineered to produce that ...(choose a part on the right to read more)
General Fitment 911 1998-05 911 TURBO/GT2 2001-05 911 GT3 2003-05
$3,126.60
Make a selection
Content: 5x double open-ended wrench (one each: 8x9, 10x11, 12x13, 14x15 and 17x19), 1x wheel nut wrench, 2x holding tools for v-belt, 1x combination pliers, 1x screwdriver, 1x phillips screwdriver, 1x pull-off lever for hub cap, 1x flexible head socket wrench, 1x spark plug socket wrench, 1x hexagon socket wrench, 1x spark plug ratchet wrench, 1x stubby screwdriver, 1x brush, 1x feeler gauge, 1x wheel nut, 1x narrow v-belt, 2x spark plug holder, 1x cleaning cloth  while the original was made of synthetic leather, the impressive new edition of the tool bag for the 356 Carrera is finished in extremely high-quality leather just like the design for the remaining 356 models, this version also features brown leat...(choose a part on the right to read more)
From $729.96
Make a selection
Fabspeed's 996 Carrera performance package replaces the restrictive OEM mufflers and factory cats with high-performance mufflers and 200-cell hjs sportcats for a deeper, throatier exhaust note and improved power and throttle response. the included performance headers replace the restrictive factory headers and with high-flowing motorsport headers. lastly, the restrictive factory airbox is replaced by fabspeed's carbon fiber competition intake system which increases the cold air flow into the engine for better power and sound.
Includes:
Maxflo performance mufflers
General Fitment 911 1998-05
$8,839.13
Make a selection
For all Porsche 997 Carrera models with the standart front bumper! The mounting is very easy. With some screwing points under the Porsche front bumper. Not for models with the aerokit or turbo | GT2 | GT3 front bumper
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
Fabspeed's 996 Carrera performance package replaces the restrictive OEM mufflers and factory cats with high-performance mufflers and 200-cell hjs sportcats for a deeper, throatier exhaust note and improved power and throttle response. the included performance headers replace the restrictive factory headers and with high-flowing motorsport headers. lastly, the restrictive factory airbox is replaced by fabspeed's carbon fiber competition intake system which increases the cold air flow into the engine for better power and sound.
Includes:
Maxflo performance mufflers
General Fitment 911 1998-05
$8,839.13
Make a selection
For all Porsche 997 Carrera models with the standart front bumper! The mounting is very easy. With some screwing points under the Porsche front bumper. Not for models with the aerokit or turbo | GT2 | GT3 front bumper
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
$1,042.80
Make a selection
Side skirts set tradition rs our side skirts are much wider than the stock components, which leads to a wider underbody and thus to more downforce. The mounting is very easy. Plug&play at the OEM screwing points. For all Porsche 997 Carrera with the (c2) narrow body | 2 | s | GT3.
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
$1,133.00
Make a selection
© 2024 Automobile Atlanta Inc.
505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844
|